• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

The Woodgineer logo

  • Contact Us
  • Home
  • My Tools & Supplies
  • Commissions
  • About

cordless screwdriver

Bosch IXO Special Edition Screwdriver Review

June 24, 2018 by The Woodgineer Leave a Comment

Ladies and gentlemen put your best dress or suit on and get ready for some DIY with glamour! This is my review of the Bosch IXO limited edition lithium ion screwdriver made with Swarovski crystal embellishments. DIY will never be unglamorous again!

First of all let me start by saying I am in no way affiliated with Bosch in any way, they haven’t sponsored me and well…probably never will now!

Sometime….last year I won this bosch IXO screwdriver in their prize draw and it’s pretty much been sitting in a box ever since. 

I’ve tried to sell it but never got any reasonable offers so thought its about time  I just break it out of the box and use it.

Which was also a great opportunity to do an unboxing and review.

Now I’ve always been a big fan of Bosch tools.  I have a Bosch router, a jigsaw and a hammer drill and never had any complaints with any of them in and I’ve been using them for years.

But when I saw this lovely little tool I honestly did not know what to think….

It retails for just under £300 on Amazon compared to the normal £30 you would pay for their regular old IXO.

And it is basically their £30 IXO cordless lithium ion screwdriver but with one big difference….

It is embedded with Swarovski crystals!

Well it certainly is….sparkly!

I’ve no idea what Bosch had in mind when they designed this but it was a limited edition so I’ll give them some slack.

There are apparently 700 swartschy crystals embedded – I would count them but I have a dinner party to attend and its bring and assemble your own dining room table.

So the screwdriver itself feels good in my hand, certainly bosch did put a great deal of thought into ergonomics when they designed this and it feels pretty lightweight.  The specs say about 300 grams although I’m not sure if that includes the weight of the crystals of course..

This special edition was made I’m told to mark the 10 millioth IXO screwdriver sold so Bosch have had plenty of time to review and refine the design.

Also in the box is the usual manual, charger and a 10 piece bit set which is pretty nicely tucked into the charger.  Oh and it even comes with spare crystals just in case some fall out!

The bits can be inserted quickly enough and oh….there is a small LED light fantastic….if your working in dark corners of course.

It comes with a reasonable bit set as you would expect and of course a charger which apparently can charge thing in about 5 hours.

Battery life in most of the reviews I’ve seen says about 4 hours but I did a more realistic test as with a load perminantly on.  It lasted for about an hour which I think is OK for what you need it for.

So it looks like there is a range of attachments you can get for the IXO and…oh my….I’m not sure why I wasted money on all these other tools now I really needed to get these…

A BBQ fan thingy, a wine bottle opener, A salt and pepper grinder…

I think I found out what’s going to be on this years xmas list!

Well there isn’t really much to be said about that other than its significantly more convenient than using a normal screwdriver or my cordless drill.

The torque probably is fine for general DIY stuff but any significant resistance and it stops.  Of course this could be really useful if your careless with your tools and only want limited torque when assembling stuff.

It also only spins at around 200rpm so no variable control like your normal drill/driver but this is fine.

The specs say its about 55w and when you consider a my cordless 24V drill is 300w and my impact driver 550w this is never going to replace them obviously but for general screwing as per its intended purpose fine.

I feel I now need to wear a tie upon going into the workshop so I tried to gift it to my lovely wife.  But she told me to go away (actually not the exact words she used)

It looks like I’m stuck with it.

So any good review you have to ask the question would I buy one of these?

And honestly the IXO driver, yes.  Its small enough to sit near my assembly bench as an extra screwdriver to aid in general assembly work and definitely good enough for basic DIY jobs around the house such as cobbling together some Ikea furniture.

Would I buy the sparkly crystal embedded version for £300?

What do you think?

No.  The answer is no…

You can buy some of the items mentioned in the video here.  Note that as an amazon affiliate I will take a small share of the profits but the product wont cost any extra.

The latest IXO screwdriver https://amzn.to/3yog04d

The spice grinder attachement https://amzn.to/34dTc9L

The bottle opener https://amzn.to/3vhEBpH

The BBQ fan thingy https://amzn.to/33XPOzF

Filed Under: Reviews, YouTube Videos Tagged With: blingupyoutools, bosch ixo, cordless screwdriver, diy glam, glamorous diy, power tools, sparkly, swarovski, swarovski crystals

Primary Sidebar

contact@thewoodgineer.com

/blame @brainfizzuk Hoping this table is as amaz /blame @brainfizzuk 
Hoping this table is as amazing as he says it is! 😁
#trend #woodworking #routertable
Hope this gets there in time! Sanjay was just sim Hope this gets there in time! 
Sanjay was just simply awesome ❤️(also hope @e3donline don't mind the poor quality first layers I'm currently doing!)
#3dprint #e3d #sanjayhex
And one more kids project video now posted on my Y And one more kids project video now posted on my YouTube channel showing how made these cool fake fossils in slate using @vectricltd aspire and my little 1419 CNC!
Absolutely loved using Aspire to make these and really excited I can now use it on my bigger @ooznest workbee machine.
Go check it out but don’t tell my daughter they’re not real! 🤫
#fossils #cnc #1419cnc #vectric #slate #makingfossils #fakefossils
Continuing to cross post some of my kids projects Continuing to cross post some of my kids projects over to my main YouTube channel you should check out this “new” one where I use my extreme woodworking skills and technical knowledge to create realistic stick people for the garden!
#kidscrafts #minimakers #woodcrafts #makers #stick #stickpeople #britishmanufacturing
I’m doing the sensible thing and consolidating s I’m doing the sensible thing and consolidating some of the many channels and accounts I have especially where there’s crossover.
This means I’m shutting down a few Instagram accounts and posting more stuff about my pens and kids crafts here and on my little YouTube channel. 
Thanks everybody for being here and hope you’ll continue to follow me! 🥰 (and no hard feelings of you don’t)
I think I’ve earned my woodworking badge! 🥰 I think I’ve earned my woodworking badge! 🥰
Check out this plywood art I’ve installed in the garden as a tribute to hey duggee!
Video is on my channel as it wasn’t making sense to try and somehow run two woodworking channels. (Link in bio)
@heyduggee @cbeebieshq 
#duggee #heyduggee #chewchew #woodart
Alan the Dalek (middle) has been dropped off safel Alan the Dalek (middle) has been dropped off safely with me thanks to @xrobotsuk and peeps at @somakeitsoton 
Got some fun ahead of me to get him going and patched up but he’s going to be better than ever!  Hoping he can represent the makerspace at some future events.
#dalek #makerspace #exterminate #drwho #dalekbuilding #dalekbuilders
I didn’t go to @makerscentral this year and felt I didn’t go to @makerscentral this year and felt pretty gutted about it. 
However thanks to some fellow makers and friends I felt I was there in spirit at least with constant updates and nice photos of me using the filter I made 🥰
Big thanks to everybody who made me feel included and of course to the MC team and exhibitors who looked like they put on a brilliant show!
No filters next year if it’s on, I’ll be there!
#makersofinstagram #makers #makerscentral #mc22 #igfilter
New video out reviewing the Veiko angled t-quare f New video out reviewing the Veiko angled t-quare from banggood.com
Its a rather good tool I think!
Shoutout for @casualdiy for being able to review these things far far better than me 😉
#tools #diy #toolreview #woodworking #woodpecker #banggood
Load More... Follow on Instagram
Making some CNC Fossils
My daughter loves dinosaurs and thus fossils!  So I made these cute little replica fossils on my mini CNC.  It's the red 1419 CNC from banggood.com and Vectric Aspire (the very best CNC software I've ever used)
The full review if you want to lookat one of these machines can be found on my channel here:
https://youtu.be/qVfCnhFGE68
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
How to "make" Fossils on the CNC
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_DTemPAv9iCg
How to Make Stick People - Woodland Crafts
These cute stick people we whipped up after a woodland walk.  Perfect for confusing the birds and just good fun :)
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
Woodworking for Kids - Stick Family
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_naikQrEEtwU
Hey kids, isn’t it time for.....Woodworking!
My daughter is a big fan of Cbeebies Hey Duggee, almost as much as I am!
So I thought lets add a bit of duggee fun to the garden in the bamboo and made this fantastic little chew chew panda.
I use a lot of tools in this video but everything I use you could do with basic hand tools and a bit more patience!
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
Making Fun Garden Art - Hey Duggee's Chew Chew Panda
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_ZLfMJAYhscM
Veiko Aluminum Angle Positioning T-Square from Banggood Review
I absolutely love this tool even if it is a cheaper version of the woodpecker tools one.  Sturdy, precise and just feels nice to use, can't really give it enough praise!
The tool can be found on Banggood here:
https://uk.banggood.com/custlink/K3mE2Zmvrm
VEIKO Aluminum Alloy 300mm Angle Positioning T Square Posi Lock Ruler Woodworking Edge Ruler Angle Measure Ruler Scriber Carpentry Tool - 300mm
Casual DIY Channel is here:
https://www.youtube.com/channel/UCOr70KjRTS9zUCY2hKF5E8w
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com 
And if you really want to help support the channel please consider signing up on Patreon.  I have a few rewards like behind the scenes info, shoutouts, stickers and badges.
https://www.patreon.com/m/thewoodgineer
Thanks all!
Oh and don't click this link.  Seriously don't....
https://bit.ly/2A9va4b
Veiko Aluminum Angle Positioning T-Square from Banggood Review
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_JPRbdZwaVOM
Load More... Subscribe

Recent Posts

  • Worx Maker X Review – WX988
  • Making a Walking Stick
  • Can I Convert a 3D Printer into a CNC?
  • Stick Family
  • Making a 3D Printed Animated GIF

Copyright © 2022 My Wordpress on the Foodie Pro Theme