• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

My Wordpress logo

  • Contact Us
  • Home
  • My Tools & Supplies
  • Commissions
  • About

lithophane 3d print

Making a 3D Printed Animated GIF

January 28, 2020 by The Woodgineer Leave a Comment

Hey people – I’ve been playing with 3D printed lithophanes and making these awesome photos come to life. This short tutorial post will go over the steps I made to create the Picard animated GIF in the video using 3D printed frames – a 3D printed animated GIF if you will!

  • You will need: Nothing!
  • If you don’t have a 3D printer you could always make these and get a 3D printing service such as 3D Hub or shapeways 🙂
  • You need a light source to shine behind the lithophanes but of course you could just use the sun 😉

So the concept of lithophanes has been around for hundreds of years. They were originally made of thin porcelain and would involve etching or molding artwork onto the substrate and shining a light source behind to reveal the artwork. Thinner areas let more light through and thicker areas less so with some skill some quite detailed images could be represented.

Only in recent years we’ve seen them 3D printed and people have figured out lots of ways of making them.

You can now make them directly in Cura or use your favourite 3D modelling package but I’ve been using this online tool by Mark Durbin. It’s available at:

3Dp.rocks/lithophane/

The tool lets you upload an image and it will directly process this into a STL file which you can download and print.

There are some basic controls for modifying the STL and choosing different shapes.

There’s the standard flat, curves both concave and convex, a solid cylinder, pillow shaped, dome shaped and even heart shaped.

Printing them needs to be done vertically as the bottom layer squashing can distort and lesson the effect. So once you have your image turned into a model, you may need to rotate it.

I’ve done a range of different thicknesses and found for normal ABS and PLA 3mm thick is optimal. Any less and you lose definition and anymore and light doesn’t get through the thicker parts.

Although I’m sure somebody has done it, I’ve not seen anybody do much with stop motion lithophanes yet.

Probably because there isn’t any logical reason to but hey, sometimes you just want to do stuff because you can.

And partly to celebrate the new Star Trek spin off Picard and partially because I needed something short to test I decided to use the classic Picard face palm meme!

Preparing the 3D Prints

First I used this nifty online tool EasyGIF to break the meme into separate images.

https://ezgif.com/split

There were about 39 in total but I only needed 27 of them to convey fully what’s going on.

I then manually imported and made STLs for each image.

And of course 3D printed them.

Preparing to Take the Photos

With all the Picard’s printed I needed some kind of jig so they could all be placed in the same place relative to the camera and I could run a little stop motion magic.

I was going to 3D print something complicated but a scrap piece of wood will do fine for testing.

Camera mounted one end with an elastic band.

I’m using a c920 logitec web cam here as it’s a great little camera for being able to adjust settings.

Pop the light the other end and the frame goes in the middle.

A little bit of experimentation was needed to get the thing just right. It took a while to play with the settings to get things looking good.

Contrast needed go up a bit higher so we can make out the detail and of course I needed to adjust the focus.

I put to make a mark on the wood where the base sits so I can make sure each one is in the same place.

And to make extra sure things stayed in the same place, I glued a little bit of wood onto the board. Now the frame can quickly push up against it.

I wasn’t too worried about it being slightly too left or right as this can be fixed in the software later.

Making the Animation

Now the fun job, lets take a photo of each of these 27 frames….

With the photos done I imported them into Adobe Premier. This is remarkably easy to do, just make sure your images have some kind of sensible number order as the filename.

In Premier go to import, select the first image and tick the Image Sequence checkbox. This will import all those images as a sequence you can then use just like any other video clip.

This sequence was 27 frames long which is just over a second of footage. To complete the circle I rendered it as an animated gif and again this is really easy to do in the latest versions of Premier, just select the Animated GIF option as your export format.

And there we go, happy Picard day everybody!

I hope you enjoyed this tutorial or the video and I’d love to know what meme to do next. Maybe you can make one too?

Let me know if you do!

Oh and I’ve uploaded this to Giphy here:

Picard GIF - Find & Share on GIPHY

So if you want to use it, please feel free!

And again remember to check out the video if you haven’t!

Filed Under: 3D Printing, Experiments, Projects, Uncategorized, YouTube Videos Tagged With: 3d print, 3d print lithophane, 3d print lithophanes, 3d print pictures, 3d printed, 3d printed lithophane, 3d printer, 3d printing, 3d printing ideas, 3d printing images free, 3d printing lithophane pictures, 3d printing lithophanes, 3d printing photos, 3d printing projects, 3d printing your photos, animated gif, gif, how to 3d print lithophanes, image to lithophane, lithophane, lithophane 3d print, lithophane lamp, lithophanes, picard, star trek

Primary Sidebar

contact@thewoodgineer.com

Alan the Dalek (middle) has been dropped off safel Alan the Dalek (middle) has been dropped off safely with me thanks to @xrobotsuk and peeps at @somakeitsoton 
Got some fun ahead of me to get him going and patched up but he’s going to be better than ever!  Hoping he can represent the makerspace at some future events.
#dalek #makerspace #exterminate #drwho #dalekbuilding #dalekbuilders
I didn’t go to @makerscentral this year and felt I didn’t go to @makerscentral this year and felt pretty gutted about it. 
However thanks to some fellow makers and friends I felt I was there in spirit at least with constant updates and nice photos of me using the filter I made 🥰
Big thanks to everybody who made me feel included and of course to the MC team and exhibitors who looked like they put on a brilliant show!
No filters next year if it’s on, I’ll be there!
#makersofinstagram #makers #makerscentral #mc22 #igfilter
New video out reviewing the Veiko angled t-quare f New video out reviewing the Veiko angled t-quare from banggood.com
Its a rather good tool I think!
Shoutout for @casualdiy for being able to review these things far far better than me 😉
#tools #diy #toolreview #woodworking #woodpecker #banggood
Sadly I can’t make it to @makerscentral this yea Sadly I can’t make it to @makerscentral this year 😭 but I have whipped up an instagram filter you can use to simulate what it would be like if I were there! 🤯
Just search for it under “miss you at makers” and use it at the show if you’re going!
Those going please have an amazing time 🥰
Side note: I made this with Spark AR which is brilliant, easy to use and there are some amazing tutorials out there showing you how to use it properly.  the pretty awesome @estefanniegg does a particularly great one on her YouTube channel 😎 if you want to learn more!
#sparkar #igfilters #makerscentral #mc22 #mc2022
Any 3D modelling peeps out there that can tell me Any 3D modelling peeps out there that can tell me how I can take an STL with thousands of holes and internal voids and turn it into something simple, smooth and solid?
Been messing around with mesh mixer with no joy and struggling as the file is massive!
#3dprinting #3dmodeling #meshmixer
Putting some motivational stickers up in the works Putting some motivational stickers up in the workshop. 
This guy 7 years ago had enthusiasm and passion and it came across on camera and felt great!
Pictured here I’m explaining how we’re about to take the @somakeitsoton Dalek with a sun hat to a carnival.
I need to get this enthusiasm back. 
Any tips?
#makersgonnamake #youtuber #maker #makersmovement
We blooming made it! The cat is unimpressed but I We blooming made it!  The cat is unimpressed but I’m beaming with happiness at completing and testing my workbee CNC 🥰
Taken over 4 months but that’s down to illness and laziness as instructions from @ooznest were brilliant.
Should have used a larger tool for the cut but at the end of the day it worked and was my first major mistake to learn from. 
I’m going to be hasssling @dean_makes and @smelly_cat_creations for advice so I don’t make too many more 🤗
Guess I gotta make some stuff now! 🤔
#workbee #cnc #helloworld #ooznestworkbee #ooznest #ooznestcnc
Wow. Motors on the Workbee are powerful and not t Wow.  Motors on the Workbee are powerful and not to be messed around with or fought against.  This piece of ducting tried to and failed 😂 
Managed to catch it just as it was about to either rip the bracket from the wood or slice the ducting in half!
#workbee #ooznest #cnc #cncbuild
"Don't you dare try and move me from my new house" "Don't you dare try and move me from my new house"
CNC build progress continues to be delayed by cat.
#workbee #cnc #cncbuild #ooznet
Load More... Follow on Instagram
Veiko Aluminum Angle Positioning T-Square from Banggood Review
I absolutely love this tool even if it is a cheaper version of the woodpecker tools one.  Sturdy, precise and just feels nice to use, can't really give it enough praise!
The tool can be found on Banggood here:
https://uk.banggood.com/custlink/K3mE2Zmvrm
VEIKO Aluminum Alloy 300mm Angle Positioning T Square Posi Lock Ruler Woodworking Edge Ruler Angle Measure Ruler Scriber Carpentry Tool - 300mm
Casual DIY Channel is here:
https://www.youtube.com/channel/UCOr70KjRTS9zUCY2hKF5E8w
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com 
And if you really want to help support the channel please consider signing up on Patreon.  I have a few rewards like behind the scenes info, shoutouts, stickers and badges.
https://www.patreon.com/m/thewoodgineer
Thanks all!
Oh and don't click this link.  Seriously don't....
https://bit.ly/2A9va4b
Veiko Aluminum Angle Positioning T-Square from Banggood Review
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_JPRbdZwaVOM
This is the review video for the 1419 CNC I got from Banggood.com.  It's a fantastic little machine for the money able to cut wood, plastic, stone and soft metals and I must admit, I love it.
If you do buy one of these machines please check out my build video for some assembly tips!
https://youtu.be/YzRjM8qMc0o
My CNC fossils video can be found on my other channel here:
https://youtu.be/RiO3WwUy4Sc
COSMOs build video in Italian can also be found here:
https://youtu.be/9TYmnd3_o2E
Some of the links below are affiliate links and I may get a small percentage of any sales (you don't pay any more)
The CNC
https://uk.banggood.com/custlink/mDmEASTLZz
Best Software to Use
https://www.vectric.com/
500w Motor
https://www.banggood.com/custlink/vvKRbcLIuB
Hex Keys (very good!)
https://www.banggood.com/custlink/GDKhnpOiwN
Precision Clamp
https://amzn.to/3yOcy3y
ER11 Collets
https://www.banggood.com/custlink/mKGRQpLUCK
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
1419 Red CNC Review
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_qVfCnhFGE68
This is the build video for the 1419 CNC I got from Banggood.com.  Its a fantastic little machine for the money able to cut wood, plastic, stone and soft metals but instructions were lacking so I thought I'd give some a go.
This is my first build video so apoligies if its as helpful as rubber lips on a woodpecker and any and all feedback is welcome!
Some of the links below are affiliate links and I may get a small percentage of any sales (you don't pay any more)
The CNC
https://www.banggood.com/custlink/mDKEnCLIw9
Best Software to Use
https://www.vectric.com/
500w Motor
https://www.banggood.com/custlink/vvKRbcLIuB
Hex Keys (very good!)
https://www.banggood.com/custlink/GDKhnpOiwN
Precision Clamp
https://amzn.to/3yOcy3y
ER11 Collets
https://www.banggood.com/custlink/mKGRQpLUCK
Chapters
00:00 Intro & Unboxing
00:50 Assembly Prep & Tools Needed
01:54 Preparing Motors
02:30 Z Carriage
04:34 X Carriage
05:53 The Bed
06:09 Y Carriage
08:00 Final Carriage and Plate Assembly
09:31 Fitting Bracket for Spindle and Spindle
10:20 Demonstrating Bit Change
10:52 Fitting Control Board and Wiring Up
12:19 Powering up
12:43 Hold downs (clamps)
12:59 Software and Testing
13:24 ROOOOXANNE!
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
1419 CNC Build Instructions
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_YzRjM8qMc0o
In this video, I turn Starbucks wooden cutlery into a handle for my spoon carving knife so I can carve wooden spoons! 
I call it Spoonception™
Its a great way of upcycling or recycling wooden cutlery so you can make your own spoons!......wait....
Some of the stuff I use in the video (note these are affiliate links)
Maker X Combo Kit
https://amzn.to/3gVkIzX
Maker X Review
https://youtu.be/pphbXRBqv8E
Starbond Glues
https://www.starbond.com/?rfsn=5545179.0e8886
The Knife Blade
https://wood-tools.co.uk/
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Making a Spoon Carving Knife from Spoons to make Spoons
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_R4g_zHJwuxo
Load More... Subscribe

Recent Posts

  • Worx Maker X Review – WX988
  • Making a Walking Stick
  • Can I Convert a 3D Printer into a CNC?
  • Making a 3D Printed Animated GIF
  • Bosch IXO Special Edition Screwdriver Review

Copyright © 2022 My Wordpress on the Foodie Pro Theme