• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

The Woodgineer logo

  • Contact Us
  • Home
  • My Tools & Supplies
  • Commissions
  • About

whittling

1st Carved Spoon

May 31, 2017 by The Woodgineer Leave a Comment

I’m not planning on becoming a full time spoon whittler any time soon but I love the idea of spoon carving and am impressed by the craft.  I wanted to make a little spoon for my daughter that she could use but also keep and in years to come say “my dad made that”

I used some bass wood as this is a really nice wood for beginner carvers like myself, with relatively friendly grain pattern and not too hard.

I used a pencil to trace the outline of the little spoon I wanted to make then started whittling away around the edges.

I used my flex cut carving jacks gouges to cut out the hollow and one of the knives to do the actual whitling.  I can see how this would be a nice tool out in the field but suspect a dedicated knife/gouge is the way to go when in the workshop.

So to really personalise it I then burned my daughters initials on the handle using a soldering iron.

I then soaked the entire spoon in tung oil/white spirit to bring out the grain and once dry gave it a light sand.

I then added two light coats of shellac to seal it over the following night.

Carving took about an hour and a half in total done over three nights and a further 3 nights for drying.  I don’t think it would easy to do this for a living even if you’re really good!

In hindsight a small spoon was probably more difficult to do than a big spoon would have been due to trying to hold the thing comfortably.

Most importantly – the client was happy! 🙂

…

Read More

Filed Under: Blog, Projects Tagged With: Baby spoon, diy, Pyrography, small workshop, spoon carving, whittling, wooden spoon, woodturning, woodwork, Woodworking

Primary Sidebar

contact@thewoodgineer.com

If @worxuk did doctor who... Repairing of the Dal If @worxuk did doctor who...
Repairing of the Dalek is going well though I do keep getting distracted.
#worx #worxtools #fez #dalek #dalekbuilders #makerx
/blame @brainfizzuk Hoping this table is as amaz /blame @brainfizzuk 
Hoping this table is as amazing as he says it is! 😁
#trend #woodworking #routertable
Hope this gets there in time! Sanjay was just sim Hope this gets there in time! 
Sanjay was just simply awesome ❤️(also hope @e3donline don't mind the poor quality first layers I'm currently doing!)
#3dprint #e3d #sanjayhex
And one more kids project video now posted on my Y And one more kids project video now posted on my YouTube channel showing how made these cool fake fossils in slate using @vectricltd aspire and my little 1419 CNC!
Absolutely loved using Aspire to make these and really excited I can now use it on my bigger @ooznest workbee machine.
Go check it out but don’t tell my daughter they’re not real! 🤫
#fossils #cnc #1419cnc #vectric #slate #makingfossils #fakefossils
Continuing to cross post some of my kids projects Continuing to cross post some of my kids projects over to my main YouTube channel you should check out this “new” one where I use my extreme woodworking skills and technical knowledge to create realistic stick people for the garden!
#kidscrafts #minimakers #woodcrafts #makers #stick #stickpeople #britishmanufacturing
I’m doing the sensible thing and consolidating s I’m doing the sensible thing and consolidating some of the many channels and accounts I have especially where there’s crossover.
This means I’m shutting down a few Instagram accounts and posting more stuff about my pens and kids crafts here and on my little YouTube channel. 
Thanks everybody for being here and hope you’ll continue to follow me! 🥰 (and no hard feelings of you don’t)
I think I’ve earned my woodworking badge! 🥰 I think I’ve earned my woodworking badge! 🥰
Check out this plywood art I’ve installed in the garden as a tribute to hey duggee!
Video is on my channel as it wasn’t making sense to try and somehow run two woodworking channels. (Link in bio)
@heyduggee @cbeebieshq 
#duggee #heyduggee #chewchew #woodart
Alan the Dalek (middle) has been dropped off safel Alan the Dalek (middle) has been dropped off safely with me thanks to @xrobotsuk and peeps at @somakeitsoton 
Got some fun ahead of me to get him going and patched up but he’s going to be better than ever!  Hoping he can represent the makerspace at some future events.
#dalek #makerspace #exterminate #drwho #dalekbuilding #dalekbuilders
I didn’t go to @makerscentral this year and felt I didn’t go to @makerscentral this year and felt pretty gutted about it. 
However thanks to some fellow makers and friends I felt I was there in spirit at least with constant updates and nice photos of me using the filter I made 🥰
Big thanks to everybody who made me feel included and of course to the MC team and exhibitors who looked like they put on a brilliant show!
No filters next year if it’s on, I’ll be there!
#makersofinstagram #makers #makerscentral #mc22 #igfilter
Load More... Follow on Instagram
Making some CNC Fossils
My daughter loves dinosaurs and thus fossils!  So I made these cute little replica fossils on my mini CNC.  It's the red 1419 CNC from banggood.com and Vectric Aspire (the very best CNC software I've ever used)
The full review if you want to lookat one of these machines can be found on my channel here:
https://youtu.be/qVfCnhFGE68
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
How to "make" Fossils on the CNC
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_DTemPAv9iCg
How to Make Stick People - Woodland Crafts
These cute stick people we whipped up after a woodland walk.  Perfect for confusing the birds and just good fun :)
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
Woodworking for Kids - Stick Family
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_naikQrEEtwU
Hey kids, isn’t it time for.....Woodworking!
My daughter is a big fan of Cbeebies Hey Duggee, almost as much as I am!
So I thought lets add a bit of duggee fun to the garden in the bamboo and made this fantastic little chew chew panda.
I use a lot of tools in this video but everything I use you could do with basic hand tools and a bit more patience!
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
Making Fun Garden Art - Hey Duggee's Chew Chew Panda
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_ZLfMJAYhscM
Veiko Aluminum Angle Positioning T-Square from Banggood Review
I absolutely love this tool even if it is a cheaper version of the woodpecker tools one.  Sturdy, precise and just feels nice to use, can't really give it enough praise!
The tool can be found on Banggood here:
https://uk.banggood.com/custlink/K3mE2Zmvrm
VEIKO Aluminum Alloy 300mm Angle Positioning T Square Posi Lock Ruler Woodworking Edge Ruler Angle Measure Ruler Scriber Carpentry Tool - 300mm
Casual DIY Channel is here:
https://www.youtube.com/channel/UCOr70KjRTS9zUCY2hKF5E8w
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com 
And if you really want to help support the channel please consider signing up on Patreon.  I have a few rewards like behind the scenes info, shoutouts, stickers and badges.
https://www.patreon.com/m/thewoodgineer
Thanks all!
Oh and don't click this link.  Seriously don't....
https://bit.ly/2A9va4b
Veiko Aluminum Angle Positioning T-Square from Banggood Review
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_JPRbdZwaVOM
Load More... Subscribe

Recent Posts

  • Worx Maker X Review – WX988
  • Making a Walking Stick
  • Can I Convert a 3D Printer into a CNC?
  • Stick Family
  • Making a 3D Printed Animated GIF

Copyright © 2022 My Wordpress on the Foodie Pro Theme