• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

The Woodgineer logo

  • Contact Us
  • Home
  • My Tools & Supplies
  • Commissions
  • About

worx power share

Worx Maker X Review – WX988

June 28, 2021 by The Woodgineer Leave a Comment

When I found out about the Worx maker X line of multitools I was extremely excited.  Worx giving me a free set to review may have just pushed me over the edge!

They sent me the WX988 maker combo kit which comes with the rotary tool and soldering iron and uses the same battery pack all the Worx tools use.

Which is fantastic as I already have a whole bunch of Worx tools and really like them!

Maybe I love Worx tools a little too much…

Included in the kit is the usual battery and quick battery charger – I already have about 5 of these and they are massive but a smaller one is available if you want to consider making this a travel tool.

There’s the instructions of course.  Worx always give a really good set of instructions.

And a lovely little tool kit of rotary bits for the rotary tool.  There’s polishers, cutters, diamond burs and even some sanding tools and grinders – nice little start kit with most stuff the average crafter would need. 

I’m already fairly stocked on bits though.

The kit of bits that comes with

The main drive thingy itself, battery just pops in nice and simple and really light and really small even with the battery so potentially good for an everyday carry or camping gear.  There’s a good 1.2 metre long cable on here and it looks like its braided too so should last even if you accidentally nick it with your tool.

The Rotary Tool

The rotary tool uses a 3 pin din style connector that’s keyed so you can’t plug it in incorrectly.

The keyed connector so you cant plug it in wrong

Much like similar tools out there has a button you can lock the spindle on to change the tool and a little chuck and collet.  It looks like it fits the fairly standard 3.2mm or 1/8th bits that most tools take and indeed that’s what it comes with, nice.

Sadly it doesn’t fit my Dremel collets due to the inside diameter of the tub but the thread however is the same as a Dremel so you could use a mini Jacobs chuck or switch out the collar.

Bits only need to be hand tightened but there is a flat on the chuck and a little spanner included to give it some extra grip if you need it.

The rotary tool and spanner

It says in the manual it does 5000 to 35000 rpm which is again what you expect for this type of tool and the speed is controlled from this little knob here.  

It’s a shame it doesn’t have a speed control or even an on/off control on the tool itself as you would normally be holding something in one hand and with the tool in the other.  This is probably a feature I would pay more for if they had it available.

The power button releases the hounds! No it turns the thing on and off obviously.

The “Main Drive Thingy“

Oh and its torquey, jumps in my hand and not surprising there’s a nice brushless motor inside that’s pretty powerful for its size.

Its light and its comfortable to hold too.

I also suspect this won’t be as powerful as my foredom by a long shot but….its not meant to compare with a tool like that and my big foredom is not easy to take those outside.

Oh I can just imagine now, child playing on the tramapoline and the wife bringing me a pimms while I do some carving in the garden on a hot sunny day…..

So thats exactly what I did; took it out to the garden to do some of the most relaxing power carving I’ve ever done!

Power carving a Colin the Caterpillar Face in the Garden

Not content with some wood carving I tried some diamond burrs and did a little rock carving! 🙂

A little carved rock

Soldering Iron & Wood Burner

Now before I get carried away lets give the soldering iron a go.

Its not just a soldering iron I might add – it comes with some adapters that turn it into a little wood burning tool and comes with a few different shapes of nibs.  Sadly they seem to use a different thread size to the standard weller bits but still this is pretty nifty.

The Woodburning Tips

The soldering iron tip it comes with is pretty good but it doesn’t seem to fit my standard Antex, weller or TS100 bits and Worx don’t seem to do a spare currently.  Hopefully this is something they will do as without them, this thing is only going to last as long as the tip.

Oh comes with a little stand too, that’s nice.

Turning it on it does need another push of the button on the tool itself which is a nice little safety feature.

And oh that heats up pretty fast, it has a small display like many modern irons showing the temp and it can adjust it anywhere from 200 to 480 degrees C

The Iron Heating Up

It also comes with what looks like a silicon sheath for extra protection so I’ve popped that on.  Bit fiddly to do but worth it as you can hold the iron for a lot longer.

Heat up time there was about 25 seconds to get to 200 degrees which wasn’t as fast as advertised but certainly that’s plenty fast.  It took just under 60 seconds to get to the full 480 degrees c.

It cools down from 480c in about 10 minutes so it can be cold enough to touch the end again.

Swapping the bits out is as simple as unscrewing the bit, being careful with the heating element there and sliding one of the attachments on with the tip screwed in.

Nice.

So I can imagine if you don’t already have a soldering iron, maybe you have a small desk as your maker area this could be a really really nice system but where it really shines is taking it on the go.  You could take it camping or just out in the garden or really anywhere you like.

So it’s a nice day, lets take this thing outside!

Here’s a little soldering project that I’ve been putting off for ages – suddenly the motivation to finish it while I sit in the sun with the birds chirping away its not so bad.  It’s a plug that needs adding to this transformer so I can test out some LED panels.

Soldering in the Garden

Could do with a smaller tip but this is pretty good.

Summary

So my final thoughts on this tool system? Would I take it tomb raiding with me?

Yes – I would take it on an adventure to find the lost ark

Some of the downsides are the incompatibility with other tools or lack of spares but this is no biggy, the rotary tool will accept any 3mm bit you can think of and it wouldn’t stop me buying one if I needed to.  If I had a choice though, I might give the soldering iron a miss just because of the lack of replacement tips at this time but at the same time it makes a good emergency or site soldering iron.

However, for what it is – I absolutely love it and while it’s no replacement for a top of the line soldering iron or my foredom it’s not trying to be and it works really well.  I love that I could put a more powerful battery on and carve away for hours and I love that I don’t have to clean up my mess by carving outside.

My Foredom Rotary Tool

Thanks you Worx for sending me this, I think during the summer especially its going to get a lot of use!

The Worx Maker X – Just Awesome

The Maker X system is out now on amazon and I’ve popped some affiliate links in this video description so please check them out.  If you do end up buying one I get a tiny cut of the sale and you don’t pay any more – win win!

https://amzn.to/3w06oKB

If you have any questions for me or Worx on the product please pop them in the comments below or on my video and as always I’ll try to get round to answering every comment.

Filed Under: Reviews, Woodworking, YouTube Videos Tagged With: maker, maker x, makerx, makerx rotary tool kit, review, reviewer, reviews, the woodgineer, wood burning tool, woodgineer, worx, worx 20v, worx makerx, worx makerx combo kit, worx makerx tool kit, worx power share, worx power tools reviews, worx review, worx tools, worx tools maker, worx tools maker x, worx tools review

Primary Sidebar

contact@thewoodgineer.com

If @worxuk did doctor who... Repairing of the Dal If @worxuk did doctor who...
Repairing of the Dalek is going well though I do keep getting distracted.
#worx #worxtools #fez #dalek #dalekbuilders #makerx
/blame @brainfizzuk Hoping this table is as amaz /blame @brainfizzuk 
Hoping this table is as amazing as he says it is! 😁
#trend #woodworking #routertable
Hope this gets there in time! Sanjay was just sim Hope this gets there in time! 
Sanjay was just simply awesome ❤️(also hope @e3donline don't mind the poor quality first layers I'm currently doing!)
#3dprint #e3d #sanjayhex
And one more kids project video now posted on my Y And one more kids project video now posted on my YouTube channel showing how made these cool fake fossils in slate using @vectricltd aspire and my little 1419 CNC!
Absolutely loved using Aspire to make these and really excited I can now use it on my bigger @ooznest workbee machine.
Go check it out but don’t tell my daughter they’re not real! 🤫
#fossils #cnc #1419cnc #vectric #slate #makingfossils #fakefossils
Continuing to cross post some of my kids projects Continuing to cross post some of my kids projects over to my main YouTube channel you should check out this “new” one where I use my extreme woodworking skills and technical knowledge to create realistic stick people for the garden!
#kidscrafts #minimakers #woodcrafts #makers #stick #stickpeople #britishmanufacturing
I’m doing the sensible thing and consolidating s I’m doing the sensible thing and consolidating some of the many channels and accounts I have especially where there’s crossover.
This means I’m shutting down a few Instagram accounts and posting more stuff about my pens and kids crafts here and on my little YouTube channel. 
Thanks everybody for being here and hope you’ll continue to follow me! 🥰 (and no hard feelings of you don’t)
I think I’ve earned my woodworking badge! 🥰 I think I’ve earned my woodworking badge! 🥰
Check out this plywood art I’ve installed in the garden as a tribute to hey duggee!
Video is on my channel as it wasn’t making sense to try and somehow run two woodworking channels. (Link in bio)
@heyduggee @cbeebieshq 
#duggee #heyduggee #chewchew #woodart
Alan the Dalek (middle) has been dropped off safel Alan the Dalek (middle) has been dropped off safely with me thanks to @xrobotsuk and peeps at @somakeitsoton 
Got some fun ahead of me to get him going and patched up but he’s going to be better than ever!  Hoping he can represent the makerspace at some future events.
#dalek #makerspace #exterminate #drwho #dalekbuilding #dalekbuilders
I didn’t go to @makerscentral this year and felt I didn’t go to @makerscentral this year and felt pretty gutted about it. 
However thanks to some fellow makers and friends I felt I was there in spirit at least with constant updates and nice photos of me using the filter I made 🥰
Big thanks to everybody who made me feel included and of course to the MC team and exhibitors who looked like they put on a brilliant show!
No filters next year if it’s on, I’ll be there!
#makersofinstagram #makers #makerscentral #mc22 #igfilter
Load More... Follow on Instagram
Making some CNC Fossils
My daughter loves dinosaurs and thus fossils!  So I made these cute little replica fossils on my mini CNC.  It's the red 1419 CNC from banggood.com and Vectric Aspire (the very best CNC software I've ever used)
The full review if you want to lookat one of these machines can be found on my channel here:
https://youtu.be/qVfCnhFGE68
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
How to "make" Fossils on the CNC
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_DTemPAv9iCg
How to Make Stick People - Woodland Crafts
These cute stick people we whipped up after a woodland walk.  Perfect for confusing the birds and just good fun :)
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
Woodworking for Kids - Stick Family
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_naikQrEEtwU
Hey kids, isn’t it time for.....Woodworking!
My daughter is a big fan of Cbeebies Hey Duggee, almost as much as I am!
So I thought lets add a bit of duggee fun to the garden in the bamboo and made this fantastic little chew chew panda.
I use a lot of tools in this video but everything I use you could do with basic hand tools and a bit more patience!
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/index.php/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com
Oh and don't click this link. Seriously don't.... https://bit.ly/2A9va4b
Making Fun Garden Art - Hey Duggee's Chew Chew Panda
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_ZLfMJAYhscM
Veiko Aluminum Angle Positioning T-Square from Banggood Review
I absolutely love this tool even if it is a cheaper version of the woodpecker tools one.  Sturdy, precise and just feels nice to use, can't really give it enough praise!
The tool can be found on Banggood here:
https://uk.banggood.com/custlink/K3mE2Zmvrm
VEIKO Aluminum Alloy 300mm Angle Positioning T Square Posi Lock Ruler Woodworking Edge Ruler Angle Measure Ruler Scriber Carpentry Tool - 300mm
Casual DIY Channel is here:
https://www.youtube.com/channel/UCOr70KjRTS9zUCY2hKF5E8w
Check out my blog for other projects like this
https://thewoodgineer.com
A big list of some of the tools and bits I use can be found here: 
https://thewoodgineer.com/my-tools-supplies/
If you’re a YouTuber, an awesome tool worth looking at is TubeBuddy! 
Please try it out and if you like it remember to use my affiliate link: https://www.Tubebuddy.com/themadmaker 
All my videos are edited using Adobe Premiere because it's awesome :)
https://bit.ly/2zIGikp 
Please subscribe and hit notify to be updated when I release new videos and constructive advice/feedback/ideas are all welcome in the comments below! 
I can also be found on the following platforms:
https://thewoodgineer.com
https://twitter.com/thewoodgineer 
https://www.facebook.com/TheWoodgineer
https://instagram.com/woodgineer
https://www.patreon.com/thewoodgineer
thewoodgineer@gmail.com 
And if you really want to help support the channel please consider signing up on Patreon.  I have a few rewards like behind the scenes info, shoutouts, stickers and badges.
https://www.patreon.com/m/thewoodgineer
Thanks all!
Oh and don't click this link.  Seriously don't....
https://bit.ly/2A9va4b
Veiko Aluminum Angle Positioning T-Square from Banggood Review
YouTube Video UCF0zB_FmO7xkumjrFMHPb4A_JPRbdZwaVOM
Load More... Subscribe

Recent Posts

  • Worx Maker X Review – WX988
  • Making a Walking Stick
  • Can I Convert a 3D Printer into a CNC?
  • Stick Family
  • Making a 3D Printed Animated GIF

Copyright © 2022 My Wordpress on the Foodie Pro Theme